Oregon Scientific Barbie BW68 - Manual (Page 7)

3
Chapter 2 Chapter 2
Getting Started
Your Barbie ™ World Traveler Touch & Teach ™ Globe
operates on 3 “AA” size batteries.
Battery Installation
1. Make sure the unit is turned off.
2. Turn the unit over so you will see
the base. The battery enclosure is
located at the base of the unit.
3. Using a coin, or a straight blade
screwdriver, open the battery cover.
4. Insert 3 “AA” size batteries.
(Note the correct polarity: +,-).
5. Replace the cover.
Caution
• Do not mix different types of batteries or old and
new batteries together.
• Only use batteries of the same or equivalent type
as recommended.
• Remove all batteries when replacing.
• Remove batteries from the unit if the unit is not
going to be used for long periods of time.
• Do not dispose of batteries in fire.
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries are to be removed from
the toy before being charged.
• Rechargeable batteries are only to be charged
under adult supervision.
• Remove exhausted batteries from the toy.
• Do not short-circuit the supply terminals.
Storage & Care
To ensure that the product enjoys a long life, please follow these simple rules: Regularly examine the unit
for damage to the cord, plug, enclosure and other parts. In the event of such damage, the unit must not be
used with the adaptor until the damage has been repaired. Always disconnect the power supply before
cleaning. Keep the unit clean by wiping the exterior of the unit with a dry cloth. Avoid getting the unit wet.
The unit should not be dismantled. Always store the unit away from direct sunlight, and high temperatures.
Avoid leaving the unit in a car where it is exposed to direct sunlight.
The unit should not be subjected to extreme force or shock.
BW68 manualUS0427 10/8/07 10:16 AM Page 7