LELIT PL61 - Manual (Page 8)

__________________________________________________________________________________________________________________
Pag. 8
English
TROUBLESHOOTING:
We thank you for buying one of our products, projected and assembled in accordance with the most up-to date technological
innovations.
Following carefully the simple operations described in this manual, which respect to all essential safety regulations, you will
get the best performances and will appreciate the remarkable reliability of this product in the years to come.
Please find below the description of the most frequent problems and of their solution:
PROBLEM CAUSE SOLUTION
Coffee too cold
1. The machine had not reached the proper
temperature
2. Filter-holder not preheated
3. Cups not preheated
4. Thermostat malfunctions. 1. See section “Starting the Machine” and
“Making an Espresso”
2. Filter-holder must be heated together with the
water – see section “Starting the Machine”
3. Properly heat the cups on the cup-warmer
(18)
4. Contact the nearest SERVICE CENTER
Coffee comes out too
quickly 1. Too little coffee in the filter
2. Coffee not pressed enough
3. Coffee is old or unsuitable 1. Put more coffee in the filter
2. Press coffee more firmly
3. Use a different coffee blend
Coffee leaks between the
coffee group and the
filter-holder 1. Filter-holder not properly inserted
2. Too much coffee in the filter
3. Edge of the filter-holder not clean
4. The douche seal is worn out or damaged 1. Insert the filter-holder correctly
2. Put less coffee in the filter
3. Clean the edge of the filter-holder
4. Contact the nearest SERVICE CENTER
Coffee comes out in
drops 1. Too much coffee in the filter
2. Coffee too firmly pressed 1. Put less coffee in the filter
2. Press the coffee more gently
The machine does not
produce steam even if
the LED (6) and (9) are
on 1. Micro pump not functioning
2. Obstructed outlet hole at end of steam pipe
3. Too little water in tank 1. See section “Steam”
2. Clean the outlet hole with a needle
3. See section “Starting the Machine”
The machine does not
work and the ON light
does not turn on. 1. No electricity/power supply
2. The power cable is not properly plugged in.
3. The power cable is damaged 1. Check and restore the electrical power
2. Plug in the power cable correctly
3. Contact the nearest SERVICE CENTER for a
replacement cable
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste. It must be
taken to a special local authority differential waste collection centre or to a dealer providing this
service. Disposing of a household appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate disposal of enables the constituent
materials to be recovered to obtain significant savings in energy and resources. As a reminder
of the need to dispose of household appliances separately, the products is marked with a
crossed-out wheeled dustbin.
EC DECLARATION OF CONFORMITY
Gemme Italian Producers srl declares under its own responsibility that the product
PL61, to
which this declaration relates, is in accordance with the provisions of the specific directives:
CEI EN 60335-1, CEI EN 60335-2-15
It also declares that the above mentioned product conforms with the electromagnetic
compatibility test EMC.
NB: The present declaration voids should the machine be modified without our specific
authorization.
Castegnato, 01/07/2011
Amministratore Delegato
The inserted data and pictures can be subject to changes without previous notice for the improvement of the machine’s
performances.