Oricom UHF2100 - Manual (Page 16)

16
Operation
Selecting a Call- Ring tone
Your UHF2100 is equipped with 15 different types of Call-Ring
tones.
a. Press the MENU button 8 times, the “C 1” icon will
display and flash on the LCD Screen.
b. Press the UP or DOWN button to select the desired Call-
ring tone. A respective Call- Ring tone sound will be
played when changing from one tone to another.
c. Press the PTT button to confirm your setting.
Activating the Vibrator mode
a. Press the MENU button 9 times; “3” flashes on the LCD
Screen.
b. Press the UP or DOWN button to activate the vibrator
function.
c. Press the PTT button to confirm your setting.
Note: Vibrator and Call tone can be activated at the same.
Setting the Roger Beep
The Roger beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform you that you have intentionally ended the transmission,
and you are now in receive mode.
a. Press the MENU button 10 times, the “ON” icon will flash
on the LCD Screen.
b. Press the UP or DOWN button to select the Roger beep
On/Off.
c. Press the PTT button to confirm your setting.
Setting the Key Tone ON or OFF
This feature allows your radio unit to emit a confirmation tone after
pressing each button.