Onkyo pmn - Manual (Page 14)

14
L
R
IN(PLAY)
L
R
LINE-1 LINE-2
OUT IN
L
R
TAPE
SPEAKERS
REMOTE CONTROL
OUT(REC)
IN(PLAY) OUT(REC)
CD TUNER PROCESSOR MD
L
R
SUBWOOFER PRE OUT
AC OUTLET
AC230V 50Hz
SWITCHED
100W MAX.
A-905X MODEL NO.
INTEGRATED
STEREO AMPLIFIER
RATING;
L
R
SPEAKERS
-
+
-
+
Connecting speaker systems
Connecting left and right speakers
Before connecting
• The load impedance of each speaker must be at least 4 ohms.
• Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resistance of the
speaker cords may become too high, lowering the damping factor and causing the sound quality to
deteriorate.
• Do not connect the speaker cord to the L and R connectors at the same time and do not connect two
or more speakers to the same speaker connectors.
Note
To prevent damage
to circuits never
short-circuit the
positive (+) and
negative (–) speaker
wires.
1 Strip 15 mm from
the end of each
cord.
2 Twist the stripped
end of the cord.
This unit
Right speaker Left speaker
2 Insert the stripped
end of the cord.
3 Turn the knob
clockwise to tighten.
Connecting the speaker cords to the speaker connectors
Preparing the speaker cords for connection
L
R
SPEAKERS
L
R
SPEAKERS
15mm
NO
1 Turn the knob
counterclockwise to
loosen.