Oregon Scientific Multi-Band Radio-controlled Travel Alarm Clock RMB383A - Manual (Page 6)

6
GB
Time zone setting allows you to display hours for many other
cities , e.g. if the unit is at San Francisco (-8 GMT) and you
want to know Hong Kong (+8 GMT) hour you should set 16 as
offset.
3.Enter the clock format using [▲] / [▼]. You can select 12-hour
or 24-hour display.
4.Press [MODE] .
5.Enter the hours using [▲] / [▼].
6.Press [MODE] .
7.Enter the minutes using [▲] / [▼].
8.Press [MODE] .
9.Follow the same pattern to set the year, date format (month-day
or day-month), month and day.
10.Press [MODE] button to save the changes and exit.
11.Press [MODE] button right after (within one minute) to set the
hourly chime on/off function. Use [▲] / [▼] to activate
deactivate this function.
12.Press [MODE] buttonto confirm.
Note: The unit will also save all changes and return to normal display
automatically after the unit has been left idle for a minute.
ABOUT THE HOURLY-CHIME FUNCTION
When the Hourly-Chime is set to the on-mode, the indicator [ ]
will light up and a beep sound as a reminder will be given out at the
beginning of each hour.
To enable/ disable this function, please refer to Section "How to set
the clock and calendar manually".
ABOUT THE ALARM
This unit is equipped with 2 daily alarm functiones.
To set the alarm,
1.Press [ ] to change to the alarm-time display mode.
2.Press [ ] again to select ALARM-1 or ALARM-2.
3.Press and hold [ ] for 2 seconds.
4.Use [▲] / [▼] to enter the hours.
5.Press [ ].
6.Use[▲] / [▼] to enter the minutes.
7.Press [ ].
The alarm will be automatically activated. The [ ] or [ ] icon
will appear. To deactivate the alarm, press [▲] / [▼] when the alarm
time is displayed.