Sylvania DVL150G - Manual (Page 15)

– 15 – EN
Functions
4
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER
Hint
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”,
automatically select the
best resolution setting
(FRAME or FIELD) based
on the data characteristics
of the pictures. (default).
• If you select “FIELD”,
the picture in the still
mode will be stabilized.
• If you select “FRAME”, the
picture in the still mode
will be highly defined.
• An individual picture on
TV screen is called a
“frame”, which consists
of two separate images
called a “field”.
• Some pictures may be
blurred if you select
“AUTO” in the still
mode due to their data
characteristics.
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 14.
Select the desired item.
DISPLAY menu
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
3 in the “CUSTOM Menu” section on page 14.
Select the desired item.
AUDIO menu
5
SETUP
Hint
DRC:
• This function is
available only on
the discs which are
recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection,
the sound will be down
sampled at 48kHz, even
if you set to “OFF”.
• This function is
available only on
digital outputting of
a disc recorded in
96kHz.
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
DISPLAY Setting B
AUDIO Setting C
6
SETUP
To exit the menu
ENTER
ENTER
6
To exit
the TV ASPECT
or STILL MODE
screen
To complete the
PROGRESSIVE
setting
ENTER ENTER ENTER
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a wide
screen TV is connected to this unit.
PROGRESSIVE:
• You can set “PROGRESSIVE”
to “OFF” in the DISPLAY menu
or press and hold [PLAY B] on
the front of the unit for more than
5 seconds during playback, so
that the “PROGRESSIVE SCAN”
indicator on the front panel lights
off.
• When “PROGRESSIVE”
is “ON”, video signals from
the unit’s VIDEO OUT and
S-VIDEO OUT jacks will be
distorted or not be output at all.
5 4
TV ASPECT: QUICK (Default: 4:3 LETTER BOX)
See Hint on the left.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER ENTER ENTER
ENTER ENTER ENTER
STILL MODE: (Default: AUTO)
See Hint on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
ENTER ENTER ENTER
Select the
desired
setting.
ENTER
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF 4:3 LETTER BOX
AUTO
ON
ENTER ENTER ENTER
ENTER ENTER ENTER
SETUP
PROGRESSIVE: QUICK (Default: OFF)
See Hint on the left.
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL: QUICK (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
OFF
ON
BITSTREAM
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
Select “Yes”.
ENTER
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
A c t i va t e P r o gr e s s i ve ?
SELECT: K / L SET:ENTER
NO
YES
NO
YES NO
YES
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
SELECT: K / L SET:ENTER
Select “Yes”.
ENTER
Select the
desired
setting.
ENTER
ENTER ENTER ENTER
If there is no picture or
you do not press any
buttons for 15 seconds,
Progressive scan will
switch to “OFF” and it
will exit the setup menu.
DVL150G_E6C21UD.indd 15 DVL150G_E6C21UD.indd 15 2006/05/10 9:37:13 2006/05/10 9:37:13