Yamaha DVD-S661BL - Manual (Page 13)

9
En
Connections
Eng
lish
If your AV receiver has video output jacks,
connect your receiver and then your TV so
that you can use one TV for several different
video sources (LD, VCR, etc.) by simply
switching the input source selector of your
receiver.
This unit has several types of video output
jacks. Use the one that corresponds to the
input jacks of the component to be connected.
Component video jacks <A>
Component video connections achieve higher
fidelity color reproduction than S-video
connections by transmitting video signals on
separate wires for luminance (Y: green) and
chrominance (P
B
: blue, P
R
: red).
Connect the VIDEO OUT - COMPONENT
(Y, P
B
, P
R
) jacks of this unit to component
input jacks of your AV receiver and then to
those of your TV using a commercially
available component cable. Observe the color
of each jack when you make connections.
If your receiver does not have component
output jacks, you can achieve a better video
image by connecting the component output
jacks of this unit directly to the component
input jacks of your TV.
S-video jack <B>
S-video connections achieve a clearer picture
than composite video connections by
transmitting video signals on separate wires
for luminance (Y) and chrominance (C).
Connect the VIDEO OUT - S VIDEO jack of
this unit to an S-video input jack of your AV
receiver and then to that of your TV using a
commercially available S-video cable.
Composite video jack <C>
Connect the VIDEO OUT - VIDEO jack of
this unit to a video input jack of your AV
receiver and then to that of your TV using the
supplied video pin cable.
Video connections
AUDIO OUT
COMPONENT VIDEO
S VIDEO COAXIAL
P R
P B
Y
VIDEO OUT DIGITAL OUT
VIDEO
OUT
VIDEO
IN
S VIDEO
OUT COMPONENT
VIDEO OUT
COMPONENT
VIDEO IN S VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
INPUT
VIDEO
INPUT
<C> <B> <A>
Y P B P R
P R Y P B
P R Y P B
S
V
S
V
Video pin
cable
(supplied)
AV receiver
TV
This unit