Olevia 4-Series - Manual (Page 30)

28
Remote Control Guide
Battery Installation
1.Push the tab and pull it out as illustrated below.
2.Insert two size AAA batteries (supplied) by matching the (+) and (-) on
the batteries to the diagram inside the remote control's battery department.
3.Replace the cover back and make sure the cover "snaps" into the remote
control.
Note:
1.The display unit comes with two new AAA batteries as accessories.
However, due to uncontrollable causes, the electricity of the accessory
batteries may be partially or completely drained. We do not warrant the
quality of the batteries in any case since many factors are considered.
If replacement is needed, please purchase two AAA batteries.
2.Handle remote with care. Avoid dropping it, placing in direct sunlight,
near a heater, high areas of humidity or getting it wet. If the remote gets
wet, please wipe it dry immediately. In the event of the remote not working
properly or is in operational, a replacement of remote control may be
required.
3.If you do not use the remote control for a long period of time, please remove
the batteries and store in a cool place to preserve battery life.
4.Do not mix new and used or with different types of batteries for operation.