Sylvania LC190SL1 - Manual (Page 18)

10
EN
No supplied cables are used with these connections:
Please purchase the necessary cables at your local store.
High Speed HDMI cable (also known as HDMI category 2
cable) is recommended for the better compatibility.
External Device Connection
HDMI Connection
HDMI connection offers the highest picture quality.
HDMI
(High-Defi nition Multimedia Interface) transports high defi nition
video and multi-channel digital audio through a single cable.
BD/DVD recorder
with the HDMI output jack
e.g.)
HDMI 2 HDMI 2
SERVICE
TERMINAL
HDMI OUT
CHAPTER 15 REPEAT A-B
TITLE 5
HDMI cable
side or rear of this unit
or
HDMI-DVI Connection
Use an HDMI-DVI conversion cable to connect the unit to
external video devices equipped with DVI output jack.
STEREO PCM
AUDIO OUT
R L
DVI OUT
HDMI-DV HDMI-DVI
conversion cable conversion cable
cable receiver or satellite box
with the DVI output jack
audio cables
rear of this unit
e.g.)
Note
For HDMI connection
•
The unit accepts 480i, 480p, 720p 1080i of video signals, and 32kHz,
44.1kHz and 48kHz of audio signals.
• This unit accepts only 2 channel audio signal (LPCM).
• You need to select "PCM" for the digital audio of the device you connected
or check the HDMI audio setting. There may be no audio output if you
select "Bitstream", etc.
• This unit accepts only signals in compliance with EIA861.
For HDMI-DVI connection
•
The unit accepts 480i, 480p, 720p 1080i video signals.
• HDMI-DVI connection requires separate audio connections as well and the
audio signals are converted from digital to analog.
• DVI does not display 480i image which is not in compliance with EIA/
CEA-861/861B.