Onkyo DR-C500 - Manual (Page 34)

34
DVD VCD CD MP3
Basic Playback
Stopping Playback
1
Remote
controller
Unit
DVD VCD CD MP3
DVD VCD CD MP3
Remote
controller
Unit
1
2
FM MODE
PRGV
FM MODE
PRGV
To Select a Disc
Press one of the DISC 1 to DISC 5 buttons or press DISC
SKIP repeatedly.
DVD VCD
To Pause Playback (Still mode)
Press 8 on the remote controller or
£/8 on the unit during playback.
To start playback press £ on the remote
controller or £/8 on the unit.
When an operation is prohibited
There are times when you are using the DVD Changer
Receiver and attempt to perform an operation, but for some
reason it cannot be performed. When this occurs, appears
on the screen.
DVD VCD
Press 7.
When you press £/8 on the unit or £ on
the remote controller to restart playback,
playback starts from the location where
you stopped playback because the
location index is stored in memory.
Notes
• The location where playback resumes may
vary depending on the disc or the scene
where you stopped.
• Resume playback is not available for MP3
discs.
Resuming playback from the beginning
Press 7 again after stopping playback to
clear the location index memory, then
press
£/8 to start playback. Playback
starts from the beginning of the disc.
Remote controller
only
Progressive Scan Function
Press PRGV to display Progressive
or Interlaced icon on TV.
Press PRGV again while displayed
to switch between Progressive and
Interlaced.
Notes
• When component video is connected, you can use Progressive
scan. Progressive scan is not available if S-Video or Composite
video is connected.
• If you connect a TV that is not compatible with a progressive scan
signal and choose “Progressive”, the picture may be distorted. Be
sure to choose “Interlaced” if your TV is connected using either the
Composite or S-Video terminals.