Oki 7300 User Manual
Oki Printers
Advertising
Table of contents
Document Outline
- Phase 1 - Install
- 1. Unpack the duplex unit and remove any shipping materials.
- 2. Turn off the printer, then open the front cover.
- 3. Locate the slides inside the printer.
- 4. Place the duplex unit guide rails on the slides, then push the duplex unit all the way into th...
- 5. Close the front cover.
- 6. Turn on the printer.
- Phase 2 - Activate the Duplex Unit in the Driver
- 1. Click Start — Settings — Printers. The Printers dialog box opens.
- 2. Right-click the OKI C7100, C7300 or C7500 PCL printer icon, then click Printing Preferences (W...
- 3. On the Paper tab, click Device options. Or, with Windows XP, select the Device Option tab.
- 4. Click Duplex option unit to select it, then click OK.
- 5. Click OK, then close the Printers dialog box.
- 1. Click Start — Settings — Printers. The Printers dialog box opens.
- 2. Right-click the OKI C7100, C7300 or C7500 PostScript printer icon, then click Properties.
- 3. Change the setting:
- a. Click the Device Settings tab.
- b. Scroll down to Installable Options and click Duplex.
- c. Under Change ‘Duplex’ Setting, click Installed.
- a. Click the Device Options tab.
- b. Click Duplex.
- c. Under Change setting for: Duplex, click Installed.
- 4. Click OK, then close the Printers dialog box.
- 1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection i...
- 1. Activate Chooser from the Apple menu.
- 2. Select LaserWriter 8.
- 3. Click Printer — Setup.
- 4. Click Configure.
- 5. Change the Duplex setting to Installed.
- 6. Click OK twice.
- 7. Close Chooser.
- Limited Warranty: United States