Oricom TP88 - Manual (Page 14)

records, deleting all calls will not work.
1. Press DOWN or UP to view any caller ID call information.
2. Press and hold DELETE for five seconds until “DEL ALL?” is displayed.
3. All calls are Deleted and the total call count in the display returns to zero.
C
New Call LED Indicator
The NEW CALL LED indicator will flash slowly to alert you if there have been any new
incoming calls. The display will also indicate the number of new calls.
The NEW CALL LED indicator will keep flashing until you have reviewed all new calls.
The “NEW” (new call number) counter on the display will become zero.
Using Message Waiting / Mail Box
NOTE: If you are using Telstra Messages 101 you will need to contact Telstra and
request they enable the FSK signalling on your line
This product is designed to receive (FSK) Message Waiting indication from your
Telephone service provider. For this feature to work, you must subscribe to this service
with your local telephone company.
1. When a message is preceded by a ring is sent by telephone service provider, the
Message Waiting symbol will only appear on the display, and the NEW CALL LED
will then flash.
2. After you have retrieved your message(s), the telephone company should send a clear
signal to your phone. The Message Waiting symbol will turn off until a new
message is received.
Resetting Message Waiting Indication
The telephone company sometimes will not send a message clear signal to you, and
then you will have to clear the message waiting indication manually. See trouble shooting
section.
DESK AND WALL MOUNTING
Your TP88 can be mounted to a standard wall phone plate. lf you do not have a modular
wall phone plate installed, consult with your phone company or licenced installer to get
one, or install without a wall plate. NOTE: Screws and wall anchors are not supplied.
14 14