Omnitron Systems Technology SAM3G - Manual (Page 12)

12
d. Conducted Transmit Power tolerances
Parameter Conducted Tx Power Note
GSM850 & GSM900 CS +32dBm ±1dBm GMSK mode, connectorized (Cl.4)
+27dBm ±1dBm 8PSK mode, connectorized (Cl.E2)
DCS1800 & PCS1900 CS +29dBm ±1dBm GMSK mode, connectorized (Cl.1)
+626Bm ±1dBm 8PSK mode, connectorized (Cl.E2)
UMTS1900 & 850 12.2Kbps +23dBm ±1dBm connectorized (Cl.3)
UMTS2100 12.2Kbps +23dBm ±1dBm connectorized (Cl.3)
e. Main antenna specifications
Frequency band Network type VSWR test frequency
(MHz) (MHz)
824-894 GSM,GPRS,EDGE,UMTS Low : 824
CDMA Mid : 859
High : 894
880-960 GSM,GPRS,EDGE Low : 880
Mid : 920
High : 960
1710-1880 GSM,GPRS,EDGE Low : 1710
Mid : 1795
High : 1880
1850-1990 GSM,GPRS,EDGE,UMTS Low : 1850
CDMA Mid : 1920
High : 1990
1920-2170 UMTS (Tx : 1920-1980)
Low : 1920
Mid : 1950
High : 1980
(Rx : 2110-2170)
Mid : 2110
Mid : 2140
Mid : 2170
The maximum antenna gain recommended, for consideration against RF exposure and
ERP/EIRP limits, is :
- In Cellular band : 8dBi
- In PCS band : 4dBi
UK / Europe Office
Tel: +44 (0)8700 434040
Fax: +44 (0)8700 434045
[email protected]
www.omniinstruments.co.uk
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
[email protected]
www.omniinstruments.com.au
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
[email protected]
www.omniinstruments.net