Oricom P700 - Manual (Page 10)

10
If you press when the phone is ringing, the handset ringer will be
turned off for this incoming call.
1. Press
to answer the call. turns on.
2. Call timer is displayed 10 seconds after the call is connected
3. Press
or place the handset on the base cradle to disconnect.
Making an external call
Your phone allows you to dial out a phone number in various ways.
Normal dialling
1. Press
and wait for the dial tone.
2. Use the number pad to dial the phone number. The display shows
the digits as you enter them.
3. When you enter more than 12 digits, turns on. In this case, you
only see the last 12 digits on the screen.
Predialling
Pre-dial allows you to enter a telephone number and verify it on the
screen before you place the call. The screen displays the last 12 digits
dialled but you can enter up to 20 digits.
1. Enter the phone number.
2. To enter a pause, press and hold . A pause is displayed as “P”.
3. When you enter more than 12 digits, turns on. If you attempt to
enter more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press
DEL
to erase one digit at a time. Or you
can press to clear the entire number and return the phone to
standby.
5. Press to dial out the number.
Dialling from a phonebook record
1. Press during standby. in the display turns on.
2. Press to search for the record that you would like to dial .
Or you can use the number keys to jump directly to the record starting
with the corresponding letters of that key.
3. Press OK repeatedly will show the name and number of the record
accordingly.
4. Press to dial out the number.