Oki 7300e - Manual (Page 25)

Configuration 24
Netware Tab
This is where you can configure NetWare related items.
Location Comments
Use NetWare Protocol Set NetWare protocol as enabled/disabled.
Print Server Name Set Print Server name.
Frame Type Set primary NetWare frame type.
Operation Mode Set NetWare mode.
Check box besides Bindery
Setup Check if you want to use the Bindery mode and Bindery
Setup button becomes available. If it is unchecked, the
button is greyed out.
Bindery Setup Configure items related to Bindery mode.
In this dialogue box, the following items can be configured.
Available File Server and
Selected File Server. Select file servers to
connect. Up to eight file-
servers can be selected.
Select a server from
Available file server list and
click >> button. The server is
copied to Selected file
server box.
Password. Set password for Print
Server.
Job Polling Time. Set print job polling interval
in seconds.