Ovideon LC2700w - Manual (Page 15)

Pop-out menu How to use the advanced menu
14
Menu Descriptions
H-Position Press button to adjust the horizontal position of VGA.
Clock
Press button to adjust the alignment of VGA for steady display
of VGA.
V-Position Press button to adjust the vertical position of VGA.
Phase Press button to adjust the focus and sharpness of VGA.
Reset< or > Press this button to restore all Geometric setups to default.
1. Press MENU button on the remote controller to display the main menu.
2. Press button on the remote controller to select the main item (Geometric) to be adjusted.
3. Press button on the remote controller to select the item you'd like to adjust.
4. Press button on the remote controller to adjust the default of that item.
5. Press MENU button again to quit the picture.
GEOMETRIC
GEOMETRIC
CLOCK
PHASE
H-POSITION
V-POSITION
RESET < or >
127
11
125
30