Olivetti D-COLOR P26 - Manual (Page 60)

Colour matching> 60
W INDOWS
If you are using a source RGB document, simulate the output of
another printer by making the following selections in the printer
driver:
1. On the printer driver [Colour] tab, select [Graphic Pro] (1)
and click [Options].
2. Select [Printer Simulation] (2) .
3. Select the ICC profile that corresponds to the device used
to capture or display your source document - this could be
a monitor, scanner or digital camera
(3) .
4. Remember that the names “RGB Source 1”, “RGB
Source 2” and so on relate to the number assigned to the
profile using Profile Assistant. See “Using Profile
Assistant” on page 52.
5. Select a Simulation Target Profile (4) .
1
2
3
4
5