Onkyo DV-CP702 - Manual (Page 18)

18
Connecting the DV-CP702—Continued
This section explains how to connect the DV-CP702 to a ste-
reo hi-fi amp or receiver for better sound quality than that of
most TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP702. DVD-Video discs and Video
CDs will sound better too. You can also enjoy Dolby Pro
Logic, so long as your receiver supports it.
Analog Connection
Use an RCA/phono audio cable to connect the DV-CP702’s
ANALOG AUDIO OUTPUTs to a pair of analog audio
inputs on your hi-fi amp or receiver, as shown.
Notes:
• When you use the analog audio outputs, don’t play DTS
CDs or don’t select DTS soundtracks on DVD-Video discs.
Doing so will produce unpleasant digital noise, which may
damage your equipment.
Digital Connection
Use an optical (or coaxial) digital audio cable to connect the
DV-CP702’s OPTICAL (or COAXIAL) DIGITAL AUDIO
OUTPUT to an optical (or coaxial) input on your hi-fi amp or
receiver, as shown.
Notes:
• Be sure to set the Digital Out–>Dolby Digital setting to
“Dolby Digital>PCM” (see page 41). Otherwise an
unpleasant digital noise may be heard, which may damage
your equipment.
• Never connect the DV-CP702 to the AC-3RF input on a
Dolby Digital receiver. The AC-3RF format is not sup-
ported by the DV-CP702.
To enjoy Dolby Digital or DTS surround sound, you need to
connect one of the DV-CP702 digital audio outputs to the
digital input on a Dolby Digital or DTS decoder or an AV
receiver with built-in decoders.
This hookup example will also allow you to enjoy Dolby Pro
Logic, so long as your decoder or AV receiver supports it.
Notes:
• Make sure that the Digital Out–>Dolby Digital setting to
“Dolby Digital” (see page 41). Otherwise you won’t get
surround sound.
• Also refer to the connection information supplied with
your AV receiver or decoder.
• When playing Dolby Digital or DTS source material, be
sure to select Dolby Digital or DTS decoding, respectively,
on your AV receiver or decoder. See the relevant manuals.
• You can experience Dolby Digital only with DVDs that
bear the Dolby Digital logo. Likewise, you can experience
DTS only with DVDs or CDs that bear the DTS logo.
Connecting Your Hi-Fi Amp
COMPONENT
P B P R Y
L
R
REMOTE
CONTROL
VIDEO OUTPUT
VIDEO
S VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
L
R
ANALOG
AUDIO
OUTPUT
L
R
ANALOG
INPUT
RCA/phono cable
(white)
(white)
(red)
(red)
Signal flow
COMPONENT
P B P R Y
L
R
REMOTE
CONTROL
VIDEO OUTPUT
VIDEO
S VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
DVD CHANGER
MODEL NO. DV-CP 702
COAXIAL OPTICAL
Connect one or the other
Signal flow
OPTICAL COAXIAL
Connecting for Dolby Digital or DTS
Signal flow
AV component with
Dolby Digital/DTS decoder
COMPONENT
P B P R Y
L
R
REMOTE
CONTROL
VIDEO OUTPUT
VIDEO
S VIDEO
OPTICAL COAXIAL
ANALOG
AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
DVD CHANGER
MODEL NO. DV-CP 702
COAXIAL
Connect one or the other Coaxial
digital cable
(Supplied with
U.S. model only)
OPTICAL
COAXIAL OPTICAL
1