Olympus C-370 ZOOM - Manual (Page 131)

131
Troubleshooting
9
Mi
sc
el
la
n
eou
s
When the camera is connected to a PC or printer
Possible cause Corrective action Ref. Page
The printer fails to connect.
[PC] was selected on the
monitor after connecting
to the printer with a USB
cable.
Disconnect the USB cable and start again from
step1 of “Connecting the camera to a printer”. P.92
The printer does not
support PictBridge. Refer to the printer’s instruction manual or
contact the manufacturer. –
The camera is not recognized by the PC.
The PC failed to
recognize the camera.
Disconnect the USB cable from the camera,
and connect it again. P.112
The USB driver has not
been installed. Uninstall and reinstall the OLYMPUS Master. P.106