Oregon Scientific RM998PA - Manual (Page 10)

9
EN
TRAIN THE TALKING CLOCK
To use the talking clock you need to train it to recognise
your commands. To do this, follow the key steps below and
listen to the clock’s voice prompts:
TASK ACTION
Start training program (1st time training) Press Sound / on /
off or TALK
Select user 1 or 2 Press or . Then
press TALK
Tell the clock a word you would like to Say your password
become your password. (This word will
be used from now on to activate the
talking clock)
Train the clock to recognize your Speak the command
commands. To do this, devise your own twice when asked
words for asking the clock to:
• Check the time
• Check alarm 1 and 2 status
• Turn alarm 1 or 2 ON / OFF
• Check the temperature
• Turn the projector ON
TIP The clock responds better to simple
commands
Skip to the next training command or Press
train more commands
Exit the training program Press Sound / on / off
Re-do the training program Press and hold TALK
USE THE TALKING CLOCK (ONCE IT HAS BEEN
TRAINED)
Use the steps detailed below and listen to the voice prompts:
TASK ACTION
Turn the talking clock ON Press Sound / on / off
or TALK
Bypass the introduction Press TALK
Activate the talking clock when it is in Say your password
Standby Mode
Listen to trained commands Press TALK
Exit the talking clock Let the unit idle and it will
automatically go into
Standby Mode
Turn the talking clock OFF Press Sound / on /
off twice
NOTE When the talking clock is waiting for your voice
commands, the icon will flash to show it is waiting.
NOTE If the talking clock gets no response to its voice
prompts after approx. 1 min, it will sound a beep and go into
Standby Mode. To activate it, simply say your password.
NOTE The talking clock has 4 languages available -
English, Italian, French and Spanish.
RM998PAmanual-E 05/1/20, 3:33 PM 9