Omega 8003 - Manual (Page 7)

JUICING
FRUIT AND VEGETABLE JUICER
Cone: Juicing Screen
Nozzle: No Nozzle Needed
HELPFUL HINTS
•
The included sieve, which fits on both of the bowls, should be needed after processing items that
have more pulp or foam for your taste. It should not be used during the juicing process. It should be
used at the end of the juicing process by pouring all of the prepared juice through the sieve.
•
While the Omega Nutrition Center can extract juice from unpeeled fruits and vegetables, we
recommend you thoroughly wash and peel your fresh ingredients to remove accumulated chemicals.
•
Cutting fruit or vegetables into smaller pieces may help the juice be extracted more thoroughly.
But, it is not necessary.
•
Turn on the machine and let it run without interruption until all the juice has been extracted.
•
When using a combination of soft and firm produce, alternate the items. It is best to start with the
softer items and to finish with the firmer items.
•
If the pulp in the drum starts to clog or the juicer starts to vibrate slightly during operation, turn off
the machine and empty the drum set. Reassemble and resume normal operation.
•
Do not juice anything that will change the taste in a negative way. (Example: orange rind)
•
Items that are traditionally thrown away for meals may be juiced. (Example: carrot or beet stems)
•
Soft produce will process more easily if refrigerated.
•
Items like ginger, lemon and beet may be added for taste. They should all be used according to
your taste. Although they are listed in many of our recipes, they are optional. Make drinks that suit
your personal taste or health needs.
•
After placing the last piece of fruit or vegetable into the hopper, keep the machine running for a
few seconds longer to ensure the machine has extracted the last drops of juice.
•
Clean all parts that come into contact with juice after each use of the Omega 8003/8005 Nutrition
Center.