Sylvania QUICKTRONIC T8 - Manual (Page 2)

POWERSENSE
CONTROLS
Fluorescent Building
Controls Powerline 0-10 VDC Photo Occupancy Management
Manufacturer Controllers Controllers Cells Sensors Systems
SYLVANIA ELOGIC ™ Controls
1-800-LIGHTBULB
www.sylvania.com
x x x x
Hunt Dimming
970-484-9048
www.huntdimming.com
x x x x x
Lehigh Electronic Products
610-395-3386
www.lehighdim.com
x x x x x
Leviton Lighting Controls
800-824-3005
www.leviton.com
x x x x
Lightolier Controls
800-526-2731
www.lolcontrols.com
x x x x x
Lithonia Controls
800-533-2719
www.lithonia.com
x x x x x
Lumisys
800-241-9173
www.lumisys1.com
x x x
PCI
800-767-3674
www.pcilightingcontrols.com
x x
Sensorswitch
1-800-PASSIVE
www.sensorswitch.com
x x
Siemens Energy & Automation
800-427-2256
www.sea.siemens.com
x
Starfield Controls
303-427-1661
www.starfieldcontrols.com
x x x x
The Watt Stopper, Inc
800-879-8585
www.wattstopper.com
x x
Please contact controls manufacturers to order/specify controls. For the latest controls list go to www.sylvania.com
Also for more information, check out the LCA (Lighting Controls Association) site: www.aboutlightingcontrols.org
Control Specifications/model numbers may change.
Please consult manufacturers listed for their latest control models and to order their controls.
WARNING:
Install and wire these ballast and controls in accordance with the National Electrical Code (NEC), all applicable Federal, State
and local electrical codes, as well as the specific instructions provided with the compatible control that you purchased.
Installation should be performed by qualified personnel only.
These instructions are guidelines only. Installation may vary for different controls/fixtures/applications. Be sure to follow the
control instructions and all applicable codes and standards when installing dimming systems.
Please contact controls manufacturer listed in the OSRAM SYLVANIA Inc. controls cross reference for compatible controls
and instruction wiring
NOTES: 1. Dimming ballasts source < 0.5mA (0-10VDC control input).
2. Powerline controls must be rated for the type (e.g. Fluorescent Phase-control) and size
(e.g. 600W, 1000W, 1500W & 2000W etc.) of the connected load. Do NOT use incandescent powerline controls;
incandescent dimmers are not rated for fluorescent loads and are NOT compatible with POWERSENSE ballasts.
Catalog # Date Type
Project Prepared by
Comments
SPECIFICATION DATA
Controls Guide
QUICKTRONIC ® POWERSENSE ® Controls Information
Contact the companies listed for their
2-wire Fluorescent/Powerline controls
and/or 0-10V controls information.
T8 POWERSENSE Dimming Ballast
50705 QTP 1x32T8/UNV DIM-TC
50707 QTP 2x32T8/UNV DIM-TC
50714 QTP 3x32T8/UNV DIM-TCL
50716 QTP 4x32T8/UNV DIM-TCL
T8
POWERSENSE
High Efficiency
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Specifications subject to change without notice.