Oster 133086 - Manual (Page 4)

5. Place threaded jar nut over blade and jar. Place
the threaded jar nut on jar and turn it clockwise
to tighten. (Figure 4)
6. Place jar assembly onto base. (Figure 5)
7. Make sure jar is seated into position.
8. Place ingredients into jar.
9. Place lid with filler cap on jar.
10. Plug the power cord into a 120 Volt
AC electrical outlet.
11. Slide switch to HIGH or LOW.
12. Push desired speed and blend ingredients
to desired consistency.
13. Press OFF to stop the blender.
14. To use PULSE, select HIGH or LOW. Push
PULSE and hold down for desired length of
time. Release PULSE and allow blade to stop.
Repeat cycle as desired.
4
U
SING
Y
OUR
B
LENDER
1. Clean blender according to the instructions in the “Cleaning and Storing
Your Blender” section.
2. Turn jar upside down so the small opening is at the top. (Figure 1)
3. Place sealing ring over jar opening. (Figure 2)
4. Place blade into jar. (Figure 3)
F
IGURE
1 F
IGURE
2 F
IGURE
3
F
IGURE
4
F
IGURE
5