Omron M6 Comfort - Manual (Page 19)

19
3.Using the Unit
EN
3.5 Using the Memory Function
This monitor has a memory capable of storing 90 sets of
readings. Every time you complete the measurement, the
monitor automatically stores blood pressure and pulse rate with
the date and time. The monitor also calculates an average
reading based on the measurements from the last three
readings taken within 10 minutes.
If there are three readings within 10 minutes of the last reading,
the average of the three readings is displayed. (If there are only
two readings in memory for that period, the average will be
based on two readings. If there is only one reading in memory
for that period, that reading will be displayed as the average
value.)
Note: When 90 sets of readings are stored in memory, the
oldest set will be deleted to store a new set.
To View the Average Value
Press the memory button.
The average value, based on the last three measurements, is
displayed.
HEM-7000 main.book Page 19 Monday, June 19, 2006 8:53 AM