Sylvania SGPD432 - Manual (Page 8)

7
When you use car charger, please start car engine first, then connect it to the device to
avoid possible damage to the device due to overloaded pulse current during ignition.
Please pull it out when you stop the engine, and plug it in again after next ignition.
Power On the device
In power off status, please press the power button for a while to turn on the
device, then the OSD will be displayed on screen.
Sleeping & Power –off
In power-on mode, press the power button on the device for 3-5 seconds then
the sleeping mode or confirmation for power-off screen will display as follows:
In this UI click the icon will be in sleeping mode, click the icon will power off ;
click the icon to back to normal operation.
Waking -up from sleeping mode
When in sleeping mode, press power button of the device will wake up the system. When
in sleeping mode, all the procedure in operation will pause but will back to normal status
after waking up.
Function introduction