Oricom SECURE 510 - Manual (Page 31)

31
Switch timer repeat option on or off
1. Press . Nightlight is displayed, press until Feed Timer is displayed and
press .
2. Start? is displayed, press until Timer Repeat is displayed and press .
3. 5SE and buttons to display either Repeat On or Repeat Off and press
to select. The display will show Saved
When Repeat On has been set, the feed timer countdown will start again once
the alert has sounded if it is not switched off.
The default setting is Repeat On.
Select the type of feed timer alert
1. Press . Nightlight is displayed, press until Feed Timer is displayed and
press .
2. Start? is displayed, press until Alert is displayed and press .
3. 5SE and buttons to display either Beep, Beep&Vibe or Vibrate
and press to select. The display will show Saved and you will hear a
CONlRMATION
Feed timer alert options:
Beep = Parent unit will emit an alert beep only.
Beep&Vibe
Vibrate
The default setting is Beep&Vibe.
USING YOUR DIGITAL BABY MONITOR