Oricom EZY120 - Manual (Page 65)

65
17 This oricom mobile phone meets the
guidelines for exposure to radio waves
The Australian safety standard for electromagnetic emissions (EME) is
set by the Australian Radiation Protection and Nuclear Safety Agency
(ARPANSA) and regulated by the Australian Communications and Media
Authority (ACMA).
These requirements are set out in the Radio Communications Act 1992
and the Radiocommunications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
All the applicable safety standards related to radio frequency emissions
were complied with during the development of this mobile phone.
The limit values are based on scientific directives and include a safety
margin in order to guarantee the safety of all persons regardless of age
and state of health.
SAR (Specific Absorption Rate) is a unit of measurement used in
the standard and it measures the amount of radio frequency energy
absorbed by the body when using a mobile phone. SAR values are
measured using standardized methods by which the mobile phone
works in all the frequency bands used with the highest energy level.
Although the SAR values of various phone models can differ, all the
models were developed to maintain the relevant directives on radio
frequency emissions. The following information applies to residents
of countries which, as with Australiasia, have adopted the SAR limit
value recommended by the ICNIRP (International Commission on
Non−lonizing Radiation Protection) which lies at 2W/Kg (averaged from
10 gram tissue):
The highest SAR value measured, averaged over 10g tissue, was <
0.526 W/kg for this mobile phone measured at the ear.
The Highest SAR measured, averaged over 10g tissue, was 0.87 mW/g
for this mobile phone for the 900MHz band measured at the body.
The Highest SAR measured, averaged over 10g tissue, was 1.15 mW/g
for this mobile phone for the 1800MHz band measured at the body.
SAR Information