Oki VK2000 User Manual
Page 2
Page 2/11
VK2000
Semiconductor
3. SYSTEM REQUIREMENT
• IBM PC/AT or 100% compatible
• Windows 95/98
®
operating system
• Pentium
®
CPU 133MHz min. (166MHz or above recommended)
• 16 MB working memory (32MB or more recommended)
• 10MB free hard disk space
• VGA monitor 640 x 480 pixels, 256 colours min.
• Mouse
4. HARDWARE CONFIGURATION
If you use one speaker make sure to plug it into the LEFT speaker jack. The right speaker output is for
MSM9841 mode only.
5. SOFTWARE INSTALLATION AND REMOVAL
Control software for VK2000 comes on two floppy disks. Insert disk 1/2 and select SETUP.EXE from
the Program Manager. Double click and simply follow the instructions of the setup program. The soft-
ware can be uninstalled using the Windows control panel (Add/Remove Programs).
NOTE: If you need to re-install the software, please first uninstall any previous version using the Win-
dows control panel (Add/Remove Programs).
Power Switch
Reset Switch
RS232C
Control
Software
Speaker L (3.5mmØ)
Speaker R (3.5mmØ)
Microphone (3.5mmØ)
Volume L (VR1)
Volume R (VR2)
VK2000 Board
Host PC
Line-in (for future use)