Onkyo TX-SR674/674E - Manual (Page 42)

42
First Time Setup —Continued
Changing the Speaker Settings Manually
In some situations, the measurements taken by the auto-
matic speaker setup may not provide usable results. If
running the speaker setup a second time still doesn’t pro-
vide usable results, you’ll have to set the speaker settings
manually (see pages 67–71).
Using a Powered Subwoofer
If you’re using a powered subwoofer, because it outputs
very low-frequency sound and its position is usually low,
it may not be detected by the automatic speaker setup. If
the subwoofer (SW) appears on the SP Detect Result
screen as “No,” increase the subwoofer’s volume, set it
to its highest crossover frequency, and then try running
the automatic speaker setup again. Note that if the vol-
ume is set too high and the sound distorts, it may not be
detected, so use an appropriate volume level. If the sub-
woofer has a low-pass filter switch, set it to Off or
Direct. Refer to your subwoofer’s instruction manual for
details.
Press the [RETURN] button to return to
the previous menu.
Auto Speaker Setup
========================
Review SP Distance
Front :15ft
Center :15ft
SurrRight : 7ft
SurrBack R : 7ft
SurrBack L : 7ft
SurrLeft : 7ft
Subwoofer :15ft
Auto Speaker Setup
========================
Review SP Level
Left : +12dB
Center : 0dB
Right : -12dB
SurrRight : +3dB
SurrBack R : +4dB
SurrBack L : -6dB
SurrLeft : -3dB
Subwoofer : 0dB