Onkyo CR-B8 - Manual (Page 10)

10
Part Names and Functions —Continued
The page numbers in parentheses show where you can find the main explanation for each item.
A AM ANTENNA (14, 15)
These push terminals are for connecting an AM
antenna.
B FM ANTENNA (14, 15)
This jack is for connecting an FM antenna.
C LINE IN (18)
These terminals are for connecting audio output of
external devices such as TV or turntable with a
built-in phono equalizer.
D TAPE IN/OUT (18)
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).
E HDD IN/OUT (19)
Here you can connect an RI Dock or a CD recorder.
F REMOTE CONTROL (18-20)
This (Remote Interactive) jack can be con-
nected to an jack on another Onkyo component.
The CD receiver’s remote controller can then be
used to control that component. To use
, you
must make an analog audio connection (RCA)
between the CD receiver and the other component,
even if they are connected digitally.
G OPTICAL DIGITAL OUT (20)
The optical output can be used to connect a CD
recorder or other digital recorder with an optical
digital input. The CD receiver’s CD signal is output
through this terminal.
H SPEAKERS (16)
These terminals are for connecting speakers.
I PRE OUT (17)
The SUBWOOFER jack is for connecting a pow-
ered subwoofer.
Rear Panel
8
9
1
2
3
6
7
5
4
See pages 14-20 for connection information.