Orion SKYVIEW 9877 - Manual (Page 15)

15
remove the optical tube from the mount. Make sure to have a
firm grip on the tube as it releases from the mount. To place the
optical tube in the case, the eyepiece, diagonal, finder scope
and bracket must be removed from the tube. When remov‑
ing the eyepiece and diagonal, remember to first loosen the
securing thumbscrews. The finder scope and bracket can be
removed together by loosening the thumbscrew on the tube’s
dovetail mount. Cover the front of the optical tube with the
dust cover and the rear opening of the eyepiece adapter with
its cap. Now place the tube in the case’s main compartment
underneath the padded divider. The finder scope and bracket
can be placed on top of the divider as one unit. The eyepiece
and diagonal should be covered with their caps and placed
in the external compartments of the case. Orion also offers
an optional Padded Scope Case that will fit the SkyView Pro
Mount.
storing
If you give your telescope reasonable care, it will last a life‑
time. Store it in a clean, dry, dust‑free place, safe from rapid
changes in temperature and humidity. Do not store the tele‑
scope outdoors, although storage in a garage or shed is
OK. Small components like eyepieces, diagonals, and other
accessories can be kept in the included carrying case or in
an optional eyepiece case. Keep the dust cover on the front
of the telescope and cap the rear opening of the eyepiece
adapter. Also keep the finder scope caps on if you leave it
attached to the optical tube.
cleaning the tube
Your SkyView Pro 127mm EQ telescope requires very little
mechanical maintenance. The optical tube is aluminum and
has a smooth painted finish that is fairly scratch‑resistant. If
a scratch does appear on the tube, it will not harm the tele‑
scope. Smudges on the tube can be wiped off with a soft cloth
and a household cleaner such as Windex or Formula 409.
cleaning lenses
Any quality optical lens cleaning tissue and optical lens clean‑
ing fluid specifically designed for multi‑coated optics can be
used to clean the telescope’s meniscus lens or the exposed
lenses of your eyepieces and finder scope. Never use regu‑
lar glass cleaner or cleaning fluid designed for eyeglasses.
Before cleaning with fluid and tissue, however, blow any loose
particles off the lens with a blower bulb or compressed air.
Then apply some cleaning fluid to a tissue, never directly
on the optics. Wipe the lens gently in a circular motion, then
remove any excess fluid with a fresh lens tissue. Oily finger‑
prints and smudges may be removed using this method. Use
caution; rubbing too hard may scratch the lens. On larger
lenses, clean only a small area at a time, using a fresh lens
tissue on each area. Never reuse tissues.
10. specifications
Optical design: Maksutov‑Cassegrain
Aperture: 127mm
Effective focal length: 1540mm
Focal ratio: f/12.1
Central obstruction diameter: 39mm
Primary mirror coating: Aluminum with Si0
2
overcoat
Meniscus lens coating: Anti‑reflection multi‑coatings on both
sides of lens
Eyepiece adapter: Accepts 1.25" accessories, camera T‑
threads
Eyepieces: 25mm and 10mm Sirius Plössls, fully coated with
multi‑coatings, 1.25" format
Magnification with supplied eyepieces: 62x (with 25mm) and
154x (with 10mm)
Diagonal: 90° mirror star diagonal, 1.25" format
Near focus (with supplied eyepiece & diagonal): 27 feet
Finder scope: 8x magnification, 40mm aperture, chromatic,
5.33° field of view
Finder scope bracket: Dovetail base, spring‑loaded X‑Y
alignment
Optical tube mounting plate: Fits standard photo‑style
tripods and SkyView Pro equatorial mount
Mount: SkyView Pro, German equatorial
Tripod: Steel
Slow‑motion controls: R.A. and Dec. axes
Polar axis latitude adjustment: 8° to 70°
Counterweights: 4.0 lbs. and 7.5 lbs.
Tripod: Adjustable‑height aluminum legs, accessory tray
included
Case: Deluxe carry case for optical tube included, padded
case for SkyView Pro mount optional
Polar axis finder: Optional
Motor drives: Optional
Weight: 49.6 lbs. (tube 8.6 lbs. mount 41lbs.)