Dubbing a cassette tape, Auto dubbing a cassette tape, Hi-speed dubbing a cassette tape – Optimus - Katadyn Products Inc. Dual Cassette Dubbing Deck SCT-540 User Manual
Page 8
8
Notes:
• If you want to record both sides of the cassette tape
when the reverse mode switch is in
, be
sure to press
PLAY
. Otherwise, if you press
PLAY
, only side B of the cassette tape records.
• When both sides of the tape finish recording,
DECK 2
automatically stops.
DUBBING A CASSETTE TAPE
1. Insert a prerecorded cassette tape into
DECK 1
, and
a blank tape for recording into
DECK 2
to dub a tape
on one side.
2. Press
DUBBING
.
The RECORD and DUBBING indicators light, and
both PLAY direction indicators
/
of
DECK 2
flash.
3. Press
PLAY
or
to select the direction of the
cassette tape for
DECK 2
.
The indicators in the selected buttons stop blinking
and the other indicators turn off.
The indicator
of
DECK 1
lights up.
4. Press the
STOP
button on
DECK 2
to stop dubbing.
Both decks stop.
Note:
If the original tape was recorded using Dolby NR,
the copy also has Dolby NR, regardless of the position of
the
DOLBY
NR
switch. If the tape you copy does not have
Dolby NR, you cannot add it to the tape you record.
Changing a Cassette Tape in DECK 1 During
Dubbing
If you press
STOP
on
DECK 1
during dubbing,
DECK 1
stops and
DECK 2
records 4 seconds of blank tape then
goes into the pause mode. During this time, you can
change the cassette tape in
DECK 1
. Press
then press the
PLAY
button of
DECK 1
to
resume dubbing.
AUTO DUBBING A CASSETTE TAPE
It is convenient to use this function when dubbing an en-
tire cassette tape from the beginning.
1. Insert a prerecorded cassette tape into
DECK 1
and a
blank tape for recording into
DECK 2
.
2. Press
AUTO DUB
.
The cassette tapes of
DECK 1
and
DECK 2
rewind
automatically to the beginning after you press
AUTO
DUB
. When rewinding is complete, Auto Dubbing
begins.
One side of a cassette tape is recorded from the
beginning to the end automatically regardless of the
mode.
HI-SPEED DUBBING A CASSETTE
TAPE
1. Insert a prerecorded cassette tape into
DECK 1
and a
blank tape for recording into
DECK 2
.
2. Press
HI-SPEED
.
3. Press
DUBBING
.
4. Press
PLAY
or
to select the direction of the
cassette tape for
DECK 2
.
The indicators in the selected buttons stop blinking
and the other indicators turn off.
5. Press
STOP
on
DECK 2
to stop dubbing.
Both decks stop.
RECO RD
R EC/
PA USE
14-678.fm Page 8 Wednesday, June 2, 1999 9:29 AM