Omron Healthcare INTELLI SENSE HEM-711AC - Manual (Page 17)

17
Set the monitor to the current date and time before taking a
measurement for the first time. If the date and time are not set correctly,
the measurement values stored in the memory and the average values
may not be correct.
The Blood Pressure Monitor automatically stores up to 60 individual
measurement values with the dates and times.
The monitor can also calculate an average reading based on the three
most recent measurements taken within 10 minutes of the last reading.
NOTES: • If only two readings are stored in the memory for the 10-
minute period, the average is based on the two readings.
• If one reading is stored in the memory for the 10-minute
period, this reading is displayed as the average.
1. TO START THE SETTING
Press and hold the Date/Time
Setting button to adjust the date
and time.
The year flashes on the display.
SETTING THE DATE AND TIME
STOP
280239_HEM-7011-E_S.qxd 2/19/08 3:00 PM Page 17