Oregon Scientific GPS Scout GP123 - Manual (Page 9)

E
N
9
The signal quality is as follows:
Excellent
Good
Poor
“No icon” No signal
For GPS function to operate, signal quality needs to be good
or excellent.
Once GPS signal has been found, the device can store up
to 3 locations at any one time. For your convenience, each
location is represented by an icon:
Icon Suggested use
Parking space
Home
Favourite spot
To mark location:
1. Press repeatedly to select desired icon.
2. Press and hold to save location into memory.
To search for stored location (backtrack function):
1. Press DISP/- repeatedly to navigate to GPS mode.
2. Once GPS signal has been successfully found, press
repeatedly to select the symbol which represents
the location you wish to return to.
3. Walk according to the arrow direction as shown on the
LCD display.
The display will also show the remaining distance. When
REACH appears, you have arrived at the desired location.
NOTE REACH will appear when you are close to the saved
location.
NOTE If no key has been pressed in any 15 minute period,
SLEEP will appear on the display indicating GPS has timed
out. Press any key to return to GPS mode.
NOTE Prolonged usage of backtrack function will shorten
battery life.