Oricom P100 - Manual (Page 5)

9 of 16
3. When you enter more than 14 digits, turns on. If you attempt to
enter more than 20 digits, you’ll hear a reject tone.
4. If you make a mistake, press to erase one digit at a time. Or you
can press and hold for 2 seconds to clear the entire number and
return the phone to standby.
5. Press to seize phone line and dial out the number, the icon
turns on.
Redialling
The last number dialled out will be stored as the redial number.
1. Press
and wait for the dial tone. the icon turns on.
2. Press . The last number dialled, if any, is displayed and dialled
out.
A redial number can be reviewed before you dial it out.
1. Press
. The last number dialled, if any, is displayed.
2. Press to seize phone line and dial out the number turns on.
Phonebook dialling
You need to create a phonebook record before using this feature. Refer
to the section of Setting up phonebook records.
1. Press
the turns on.
2. Press 0 to 9 to view the stored phone number. If no phone
number is stored in a particular location, a blank screen is displayed
instead. If turns on, the number contains more than 14 digits.
Press
to see the rest of the digits.
3. Press to seize phone line and dial out the displayed phonebook
record, the icon turns on.
During a Call
Call Timer
The call timer will be displayed a short while after your call is connected.
It shows the duration of the call. This timer is shown in minutes and
seconds (MM-SS) in the first hour. After that, it will be shown in hours
and minutes (HH-MM).
When you end a call, the timer will be displayed for 5 more seconds
before the screen returns to standby mode
01-15
10 of 16
Adjust the volume
Press to adjust the receiver volume to High, Medium or Low.
Mute the call
When on a call you can talk to someone in the same room without your
caller hearing you.
1. Press the icon turns on. The caller will now not hear you but
you will still be able to hear the caller.
2. Press again to turn off the mute feature.
Receive a second call
If you have subscribed to your telephone network operators service CID
on Call Waiting, the telephone will show the phone number of another
incoming call while you are talking on the phone.
1. Press
listen for dial tone then press 2 to put the current call on
hold and talk with the second caller.
2. Subsequent presses of and 2 will toggle you between the 2
callers. In any case, the display will show the phone number of the
first caller.
Refer to information provided by your telephone network operator.
Caller ID
You will need to subscribe to the CID service provided by your telephone
network operator in order to use this feature.
Your phone stores the last 20 received CID records. Each record holds
up to 20 digits.
Reviewing CID records
Turns on when a new CID number is received.
1. Press when the phone is in standby. The most recent CID
record is displayed. You’ll see a blank screen if there is no CID
record.
2. If the icon turns on, the number contains more than 14 digits.
Press to see the rest of the digits.
3. Press to see older entries and to see newer entries.
4. Press again or press to return the phone to standby. The
icon turns off.