14 settings one−touch dialling buttons, Settings – Oricom EZY100 User Manual
Page 62
62
14 Settings
One−touch dialling buttons
It is possible to assign phone numbers to the one-touch
dialling buttons M1, M2 or M3 which are then dialled
directly by pressing and holding the corresponding
button.
Each number you want to defi ne as a one-touch
dialling number must be stored in the phone
book.
Assigning a phone number to a one-touch dialling button:
1. During standby mode, press M1 to enter the main
menu.
2. Use
i/j to select Set M1/M2/M3, press M1 to
confi rm.
3. Use
i/j to select M2 Call Number, press M1 to
confi rm.
4. Use
i/j to select the following options, press M1
to confi rm.
Select View to display the number.
Select From Phonebook to select and save a phone
number from the phone book.
Select Clear to delete the number assigned.
Settings