Quadra-Fire 1900 - Manual (Page 4)

Page 4
DIMENSIONS
FIGURE 2
FIGURE 1
LEG MODEL
PEDESTAL MODEL
22 1/2" (572mm)
16 1/4" (413mm)
19 5/16" (491mm)
26 3/4" (680mm)
11 5/16" (287mm)
29 3/4" (756mm)
2" (51mm)
1 7/8" (48mm)
19 5/16" (491mm)
22 1/2" (572mm)
16 3/4" (426mm)
28 7/16" (722mm)
10" (254mm)
5 3/16" (81mm)
23 1/8" (587mm)
26 7/8" (683mm)
26 3/4" (680mm)
13 3/8" (340mm)
2" (51mm)
Page 25
1. Unscrew and remove the rear heat deflector.
2. Attach the two “S” clips to the upper edge of the outer wall of the stove.
3. Set top heat shield on stove and push down into “S” clips
4. Install chimney pipe through hole in top heat shield.
NOTE: SEE PAGE 5 FOR REDUCED CLEARANCES WITH THE STANDARD TOP SHIELD.
TOP HEAT SHIELD INSTALLATION
Rear heat deflector
“S” clips
Chimney pipe
Trim ring
Top shield
Outer wall
Top heat shield