TOA Electronics M-243 - Manual (Page 4)

[Rear Panel]
For technical details of each input and output, refer to the section "8. SPECIFICATIONS".
Monaural input terminals (1,2) [MIC, LINE]
Select either MIC or LINE for connection. If both are connected, LINE input takes precedence.
Stereo input jacks (3-6) [L , R]
Only CH6 RCA jacks are connected in parallel with phone jacks.
Stereo sub-input terminals [SUB IN STEREO L / M, R]
Signals from these terminals are assigned to stereo output buses that go to the stereo output. Connecting
only "L" will input to both "L" and "R".
Monaural sub-input terminals [SUB IN MONO 1,2]
Signals from these terminals are assigned to monaural output buses that go to monaural output 1 and 2.
Recording output jacks [REC L , R]
These stereo recording jacks output the signal from the stereo output bus.
Stereo output jacks [STEREO OUT L , R]
Monaural output jacks [MONO OUT 1, 2]
These jacks also function as stereo sum outputs by internal switch setting. (Refer to the section
"5. INTERNAL SWITCH SETTINGS".)
AC inlet
Connect the supplied power cord to this inlet.
4