Tiger Sports Feel Bowling 66-016 - Manual

QUICK START
1. Press ON to turn on the unit.
2. Press START to enter QUICKSTART mode. The game settings
are automatically set to 1-P, right-handed, Normal game. You will
start immediately with the first frame.
If you change the settings of a 1-P game to left-handed, the next
time you QUICKSTART the game your settings will be remembered.
GETTING STARTED
1. Press ON to turn on the unit. A melody will play.
2. Press SELECT to choose 1-Player, 2-Player, or Spare game, and
START to confirm.
3. Press SELECT to choose right-handed or left-handed bowler,
and START to confirm.
4. A melody will play and the game will begin.
NORMAL GAMES (1P or 2P)
Once the game is started, the screen will show whose turn it is
(1P or 2P), what frame you are on (1F) and your current score (000)
CONTROLS
ON/OFF - To turn the game on
- To turn the game off (To conserve battery life, the
game will automatically turn off after 3 minutes
of no activity.)
SELECT - To choose game mode: 1-P, 2-P, or SPARE game
- To choose left handed/right handed bowler
- To choose bowler's stance
- To choose ball aim
START - To confirm a selection and continue
- To begin each frame
INTRODUCTION
Let's hit the lanes! With Sports Feel Bowling, you'll actually get to
aim the ball, swing the ball, control the power and spin, and listen
with satisfaction as your ball strikes the pins! You can play alone,
with a friend, or get in a little practice picking up those difficult spares.
Sports Feel Bowling is so much like the real thing, the only thing
missing is the funny shoes!
AGES 8 & UP
MODEL 66-016
START
SELECT
ON/OFF
Swing but DO NOT release the ball!
WARNING: Your Sports
Feel Bowling game contains
motion detectors to sense
your swing. You DO NOT
actually roll or throw the
ball. Always wear the wrist
strap and keep a firm hold
on the ball.
You will hear a series of high-pitched beeps. These beeps indicate
the power at which you will throw the ball -- one beep is a very weak
throw, while five beeps is the strongest throw. Make sure that you
are holding the ball firmly, with the wrist strap in place. First gently
swing the ball backwards and then swing the ball just as you would
in actual bowling. If you swing the ball backwards to fast or not in a
smooth motion this could effect the motion sensor and change the
ball movement. Make sure you bring the ball forward at just the power
level you want. You will see and hear the ball travelling down the lane
where it will (hopefully) strike the pins. It's as easy as that!
1. Press START. The light at the bowler's end of
the lane will flash.
Press SELECT to move your stance along the
lane. When you are positioned where you want
to stand, press START to confirm.
2. The light at the pins end of the lane will flash.
Press SELECT to move your aiming point
along the lane. When you are positioned where
you would like to aim, press START to confirm.
3. The pins remaining in the lane will light up.
Press START again to begin your swing.