3 configuring upnp on the thomson gateway, Introduction, Enable/disable upnp – Technicolor - Thomson TG576 v7 User Manual
Page 40: Extended security, Enabling extended security, Configuring upnp on the thomson gateway
E-DOC-CTC-20080118-0003 v3.0
34
5
Getting the Most Out of Your Thomson Gateway
5.1.3
Configuring UPnP on the Thomson Gateway
Introduction
On the
you can:
Enable/Disable UPnP
Proceed as follows:
1
Browse to the
.
2
On the Toolbox menu, click Game & Application Sharing.
3
Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4
Click Apply.
Extended Security
If Extended Security is enabled only limited UPnP operation between the host and the Thomson Gateway is
allowed:
A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You can
then only connect/disconnect the Internet connection via the
Address translation mappings can only be added or changed via UPnP for the host on which the UPnP
application is running.
Enabling Extended Security
Proceed as follows:
1
Browse to the
.
2
On the Toolbox menu, click Game & Application Sharing.
3
Under Universal Plug and Play, select Use Extended Security.
4
Click Apply.