TP-Link TL-SF2109P - Manual (Page 18)

TL-SF2109P/TL-SF2117P/TL-SL2226P Ethernet Smart Switch User Guide
Here is a brief description about the parameters:
Speed/Duplex : ecided the port’s speed (10Mbps or 100Mbps) and the duplex (the
half duplex or a full duplex) mode. In half duplex mode, only translating or receiving
data at the same time. In full duplex mode, translating and receiving data can be
working at the same time.
Default Setting : 100 Base-Tx Full duplex (for TL-SF2109P), Auto negotiation (for
TL-SF2117P and TL-SL2226P)
Broadcast Storm Filtering : Click it to start the broadcast storm filtering, when the
function is enabled, the port will drop the broadcast frames after received 64
continuous broadcast frames.
Default Setting : Disable
Flow Control : This enable to turn flow control on or off when it is on, at full duplex
mode, the switch uses Port-based IEEE802.3x flow control, at half duplex mode, the
- 15 -