Topcom HB 6M00 - Manual (Page 14)

14 REV 1.1 - U8006182
ENGL
IS
H
14
14 TOPCOM HB 6M00
8 COUNTDOWN MODE
To set the countdown time:
• 2 x S2: To toggle to countdown
mode.
• [S2]: Hours will blink.
• S3 or S4: Adjust hour up or
down.
• [S3] or [S4]: Adjust hour quickly.
• S2: Confirm. Minutes will blink.
• S3 or S4: Adjust minutes up or
down.
• [S3] or [S4]: Adjust minutes
quickly.
• S2: Confirm. Seconds will blink.
• S3 or S4: Adjust seconds up or
down.
• [S3] or [S4]: Adjust seconds
quickly.
• [S2]: To confirm the count down
time.
To start the count down:
• S3: Start the counting.
• S3: Stop / pause the counting. [S4]: To reset the counting timer (when
it’s stopped or paused).
The maximum counting down time is 23 hours, 59 and minutes 59
seconds. The initial setting of the timer is 1 minute.
During the last minute the watch will beep ones every 10 seconds
and during the last 5 seconds the watch will beep once per second,
and 10 seconds when it reach zero.
When the timer is counted to zero, it will automatically reload the
preset value.
Countdown timer display
Target time
Counting
Stop-counting
‘zero’ display
HB 6M00-UK.book Page 14 Friday, June 13, 2008 10:38 AM