Toastmaster TMBL2 - Manual (Page 6)

6
NOTE: Do not fill the Blending Jar more than the MAX fill line
(500ml). Never operate when the Blending Jar is empty.
CAUTION: Never place the Blade Assembly on the Motor Housing
without the Blending Jar being completely assembled and
securely tightened.
4. Place Blending Jar Lid with Cap on Blending Jar. Remember:
Always hold Lid in place during processing.
5. Plug the power cord into a 120V AC electrical outlet. Press
and hold the Control Button. Blend until ingredients have
reached desired consistency.
CAUTION: If Blending Jar rotates during blending, immediately
release the Control Button, then secure by turning until the
Blending Jar locks into place as described in the BLENDER
ASSEMBLY INSTRUCTIONS.
• Do not touch Blades
• Do not interfere with the Blade movement
• Do not remove Blending Jar Lid
6. When blending is completed, release the Control Button to
stop the Blender, and unplug the unit.
HOT INGREDIENTS
CAUTION: Use extreme caution when blending hot liquids to
avoid accidental scalding or burns. Do not use your hand to
cover opening!
NOTE: When processing hot foods, always remove the Cap from
the Lid before beginning.
• DO NOT put more than 2.5 ounces of hot ingredients into the
Blending Jar before beginning to blend.
• After the blending process has begun, you may slowly add up
to an additional 2.5 ounces of hot ingredients through the cen-
ter hole in the Lid.
• Always use a vessel with a pouring spout when adding hot
ingredients.
OPERATING INSTRUCTIONS
(CONTINUED)
TMR_TMBL2_IB_3-7-06 7/3/06 4:14 PM Page 6