Tyan Computer TIGER MP S2460 - Manual (Page 34)

http://www.tyan.com 34
3.1-A. Master and Slave screens
The following options are for setting the configuration of the IDE devices installed in the system.
Type
FORMAT:
OPTIONS: [option]
NOTES: All options are dependent on the drive.
None
1 to 39
Auto-typing is not able to
supply the drive type, or
the user has selected
None to disable any
drives that might be
installed.
Pre-configured drive
parameters. This option is
dependent on your drive.
User The user must define the
different parameters of
the drive.
Auto Auto-detect the drive
parameters.
IDE Removeable Removeable read-and-
write media (e.g. Zip
drive).
CD-ROM Readable CD-ROM drive.
ATAPI Removeable Removeable ATAPI media
(e.g. USB Zip drive).
1 to 65,536 Number of cylinders.
1 to 16 Number of read/write
heads.
1 to 63 Number of sectors per
track.
1 to 2048 Number of the cylinders
specified as the landing
zone for the read/write
heads.
1 to 2048
None Number of the cylinder at
which to change the write
timing.
Cylinders
FORMAT: [#]
NOTES: All options are dependent on the drive.
Heads
FORMAT: [#]
NOTES: All options are dependent on the drive.
Sectors/Track
NOTES: All options are dependent on the drive.
FORMAT: [#]
Landing Zone
FORMAT: [#]
NOTES: IDE devices do not require a Landing Zone.
Write Precomp
FORMAT: [#] or [None]
NOTES: IDE devices do not require a Write Precomp.
OPTIONS:
OPTIONS:
OPTIONS:
OPTIONS:
OPTIONS: