TANDBERG K630I - Manual (Page 22)

20 Calling
To speed dial
• From standby enter the position
number and press
.
Voicemail
If your subscription includes
an answering service, callers can
leave a voicemail message when
you cannot answer a call.
To enter your voicemail number
1 From standby select Menu > Messaging
> Settings > Voicemail number .
2 Enter the number and select OK .
To call your voicemail service
• From standby press and hold down
.
Voice control
By creating voice commands you can:
• Voice dial – call someone by saying
their name.
• Activate voice dialling by saying
a “magic word”.
• Answer and reject calls when you
use a handsfree.
To record a voice command using
voice dialling
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialling > Activate .
2 Select Yes > New voice comm. and
select a contact. If the contact has
more than one number, select the
number to add the voice command to.
3 Record a voice command such as
“John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is played
back to you.
5 If the recording sounds OK, select Yes .
If not, select No and repeat steps 3
and 4.
Voice dialling
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”.
The name is played back to you and
the call is connected.
Voice commands are saved in the
phone memory only. They cannot
be used in another phone.