Tricity Bendix TM 221 W - Manual (Page 5)

5
1 Programme Chart
This will help you to select the correct time for drying.
2 Delicate Button
Press this button to reduce the temperature when drying
particularly delicate cotton or linen items.
In this case you should select a longer drying time.
On the programmes for synthetics the temperature is
automatically reduced.
Therefore it is not necessary to depress this button.
3 Start Button
After selecting the drying time press this button to start
the programme. If the door is opened during drying or
during a power cut, this button has to be depressed again
after closing the door to allow the programme to continue.
4 Mains-On Light
This lights up when the machine starts operating and goes
out at the end of the programme.
5 Drying Time Selector Dial
The selector dial incorporates two drying cycles, one of up
to 150 minutes at a high temperature (red section) for
cotton and linen, and one of up to 100 minutes at a low
temperature (grey section) for synthetic fabrics.
To set the machine to the selected time, turn the dial
clockwise until the time you want coincides exactly with
the pointer.
NEVER attempt to turn the dial in an anticlockwise
direction.
When selecting the drying time, you should remember that
it includes a 10 minute cooling phase (position
) on the
dial).
This phase should not be shortened, stopped or avoided, as
this could cause skin burns or damages to the laundry.
Additional drying
If at the end of the programme the laundry is still too
damp, set the dial for a further period of drying
(remembering to take into account the cooling period).
Control panel
Use
1 1 2 2 3 3 4 4 5 5