Toshiba HD-EP10 - Manual (Page 24)

24
2
Chapter
2
Connections
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI output of your
player to an AV receiver with an HDMI audio input. You can listen to down-converted Dolby Digital Plus
and Dolby TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding
capabilities and an optical digital input.
Caution
When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not
have Dolby Digital, DTS or MPEG decoding capability, be sure to set “Digital Out SPDIF” ( page 53) to “PCM”.
Otherwise, high volume sound may damage your hearing as well as the speakers.
Caution
When you are connecting (via the HDMI OUTPUT jack) an AV decoder that does not have Dolby Digital or DTS
decoding capability, be sure to set “Digital Out HDMI” ( page 53) to “PCM” or “Downmixed PCM”. Otherwise,
high volume sound may damage your hearing as well as the speakers.
AV amplifier
Optical digital cable
(not supplied)
Digital input
Optical
HDMI compatible device
HDMI cable
(not supplied) HDMI cable
(supplied)
You may need to adjust the HDMI
audio output to match the
capabilities of your AV amplifier.
In this case, set “Digital Out
HDMI” ( page 53) to “PCM”.
AV amplifier
HDMI input
HDMI output HDMI input
Via optical digital audio output
Via HDMI output
Connecting to an audio system
Make the connection as below, and set “Digital Out HDMI” ( page 53).
Make the connection as below, and set “Digital Out SPDIF” ( page 53).
HD-EP10_02_E 24 HD-EP10_02_E 24 07.3.20 11:21:23 PM 07.3.20 11:21:23 PM