Topcom FIDELITY SMS - Manual (Page 12)

12 Topcom Fidelity SMS
9.2.3 Re-sending Short Messages (outbox)
Sent messages are stored in the ‘Outbox’. Also when the telephone indicated ‘Error’ during sending the message can
be found, edited and send again out of the Outbox.
a. Selecting a sent message
•
Press the SMS button
• Use the scroll switch to select ‘Outbox’.
• Press OK, The last message is displayed.
• Use the scroll switch to select the desired SMS.
• Press OK, The message is displayed.
• Use the scroll switch to scroll through the complete message.
• Press OK if you want to Edit and resent, to forward or to erase the message.
b. Editing and resending a sent message
After selecting the message (9.2.3. a):
•
Use the scroll switch to select ‘Edit’.
• Press OK
• Edit the Short Message by using the Alphanumerical keypad (see 7.1)
• Press OK
• Use the scroll switch to select the ‘Send SMS?’.
• Press OK
• Enter the desired telephone number + terminal number (if allowed)
• Press OK, the display shows ‘ Send?’
• Press OK to confirm. Wait until the display indicates that the message has been sent.
c. Forward a sent message
You have the possibility to sent the same message to other users.
After selecting the message (9.2.3. a):
•
Use the scroll switch to select ‘Forward’.
• Press OK
• Use the scroll switch to select the ‘Send SMS?’.
• Press OK
• Enter the desired telephone number + terminal number (if allowed)
• Press OK, the display shows ‘ Send?’
• Press OK to confirm. Wait until the display indicates that the message has been sent.
d. Erasing sent message out of the Outbox
After selecting the message (9.2.3. a):
•
Use the scroll switch to select ‘Clear?’.
• Press OK
• Wait until the display indicates that the message has been deleted. The next message is displayed.
9.2.4 New Incomming Messages (Inbox)
When you receive a new message the display shows ‘Receiving...’. The New Message indicator will blink once the
message is stored. The number of New messages is displayed.
All incomming messages are stored in the ‘Inbox’.
Stored messages can be replied, forwarded or you can select to dial the number of the sender.
a. Selecting a received message
•
Press the SMS button
• Use the scroll switch to select ‘Inbox’.
• Press OK, The newest message is displayed.
• Use the scroll switch to select the desired SMS.
• Press OK, The complete message is displayed.
• Use the scroll switch to scroll through the complete message.
• Press OK if you want to reply, to forward or to dial the telephone number of the sender.
b. Replying a received message
After selecting the message (9.2.4. a):
•
Use the scroll switch to select ‘Reply?’.
• Press OK
• Enter a new Short Message by using the Alphanumerical keypad (see 7.1)
• Press OK
HL_FidelitySMS.book Page 12 Monday, August 4, 2003 3:38 PM