TC electronic SDN BHD PowerCore - Manual (Page 13)

SYSTEM SETUP - plug-in loading
The System Setup options controls the way the plug-ins are loaded onto the DSPs in
your PowerCore system. There are three options:
Adjust for least host CPU consumption
Chose this setting if you experience clicks or dropouts.
High compatibility mode
This is the default setting and it will work perfectly for most setups.
Adjust for most Plug-Ins
This is the ideal setting if you use many small and low CPU consuming plug-ins.
SYSTEM SETUP - Buffer Multiplier
If you experience host CPU spikes you may need to increase the PowerCore’s buffer
size. The buffer multiplier increases your soundcards buffer setting by a factor 1,2,3
or 4. Increasing the buffer multiplier results in increased latency and should
therefore only be increased if CPU spikes actually occur.
EE
NN
GG
LL
II
SS
HH
22 / POWERCORE POWERCORE / 23
EE
NN
GG
LL
II
SS
HH
SETUP PAGE
By clicking on the Setup tab in the control panel, you will be able to perform some
advanced tweaks to your PowerCore system.
SYSTEM INFORMATION
The System information indicates the current PowerCore software, drivers and Control
Panel versions.
Check for update
By pressing the CHECK FOR UPDATE button the software will automatically access
the internet and check to see if a newer version is available for download. Before
downloading you will be prompted and asked to confirm the download.
System Report
If for some reason you need to get in contact with our support center they will ask to
see a system report. The system report is a small text-file containing all relevant
information of your current system. To create a system report, press the SYSTEM
REPORT button. The file will be saved on your desktop. The system report file will
not contain any personal information, and TC will use the information only in order to
help with issues.