Troy-Bilt 634K--ProLine - Manual (Page 26)

26
MODELS 630C, 634A & 634K
* Use as required to obtain between.005” and.015” allowable end-play.
REF
NO.
PART NO. DESCRIPTION
1 GW-9517 Snap Ring
2 GW-9400 Drive Shaft Bearing Cup
3 GW-50043 Support Washer, Rear
4 711-04109 Drive Shaft (B)
711-04110 Drive Shaft (A)
5 GW-9401 Drive Shaft Bearing Cone
6 GW-1224-1* Shim, Rear Bearing Cap,.010" thick
GW-1224-2* Shim, same as above, except.030" thick
GW-1224-3* Shim, same as above, except.005" thick
GW-1224-4* Shim, same as above, except.062" thick
— GW-1325C Shim Set (Incl. the following shims:
two #1224-1, two 1224-2 & one #1224-4)
3
4
6
2
1
5
(A) For Model 630C
(B) For Model 634A
and 634K